Lead Mechanical Engineer Full Time

JOB SUMMARY

• Responsible for the technical integrity of assigned Mechanical Engineering activities.






• Responsible for quality defined in quality management system in general as well as according to governing rules, regulations, standards, specifications and or procedures.
• Independent responsibility for the professional execution of the work assigned to the team.
• Contribute to efficient execution in compliance with the Project schedule.
• Performance targets for the year to be established in Q1 every year as per instructions from NOV and managed through standard business processes and described in the performance tool.
• Execute projects with quality and cost-effective engineering deliverables, according to company directives and instructions, within laws, rules, and regulations.
• Participate and adhere NOV team strategy as well as business objectives set by NOV.
• Participate in package-specific tests and inspections as agreed with Project Quality Manager (PQM)

JOB RESPONSIBILITIES:

HSEQ

The Engineer Shall On Own Initiative:

• Take personal responsibility for HSE by focusing on own behavior.
• Ensure that own work follows Company requirements for HSEQ.
• Contribute to continuous improvement of quality and safety of our products and deliveries.

Tasks And Responsibilities (not Exhaustive)

The Engineer shall on own initiative:

• Pursue professional development within own discipline/area,
• Report deviations, suggest improvements to the company QM system.
• Proactively work to continuously improve the company and its operations by LL initiatives.
• General technical assignments as requested by the project management.
• Design, drawing and model review.
• Budget analysis, Resource Deployment, Resource management
• Development of specifications and other engineering documentation,
• Interface with subcontractors, suppliers, vendors,
• General tasks related to procurement support, documentation, reporting, etc.
• Training and experience transfer of other less experienced engineering personnel.
• Technical Requisition (owner)
• Equipment Datasheet for Inquiry and Purchase Order (owner)
• Technical Bid Evaluation (TBE) (owner)
• originate, drive resolution, and coordinate the clarification logs with Bidders – Technical Deviations and Clarifications (TD&C) – one per Bidder. (owner)
• Prepare a documented Recommendation for Award (RfA) based on TBE and TD&C’s (owner)
• Supplier deliverables – for each of them: review, collect and check other disciplines’ comments, prepare mark-up, decide, and stamp the status code on the document; fill in and file relevant check lists as applicable.
• Critically analyze comments received from Client and advise the project team regarding potential extra-contractual requirements or scope variations.
• Drive and coordinate closure of punch lists.

Reporting and Communication

The Engineer Shall On Own Initiative:

• Reporting in project to the Lead Engineer / Engineering Manager and Project Manager.
• Report any non-compliance with HSEQ requirements to the Team Manager.
• Interact with the Engineer Manager regarding technical and project related challenges.

Methods of Work

• Ensure that relevant working methods are followed.
• Perform tasks in such a way as to reduce environment and health risks.
• Ensure tasks performed are to a high quality, be involved in and suggest improvements where they may be needed.
• Participate in the evaluation of working methods and conditions thereby minimize the risk for workplace and environmental incidents and thereby minimize the risk for quality issues.
• Ensure processes are performed in compliance with internal and external requirements, defined and documented, continually measured, evaluated, improved and secured.
• Be proactive and Manage schedules and work to tight deadlines.

Subordinates, peers and leadership.

• Actively participate in the appraisal process, ensuring objectives are entered into the system and are reviewed on time as required.
• Work closely with peers to reach the common and shared goals for NOV.

FACILITY SPECIFIC RESPONSIBLITIES:

• Preparation of Mechanical Datasheets, Material Requisition, Technical Bid Evaluation, Feasibility Evaluation, Mechanical Equipment Design and drawings,
• Input sketches for drafts man/ 3D modeling designer and datasheet
• Detail Engineering knowledge of Vessels internals & Detailed Engineering knowledge of rotating equipment and associated accessories lube oil system, fuel gas system, CIP system and associated electrical items interfaces & instrument items interfaces.
• Detail Engineering, Analysis and calculations,
• Development of specifications and other engineering documentation,
• Interface with subcontractors, suppliers, Vendor Management

BEHAVIORAL SKILLS/COMPETENCIES REQUIRED

• Communication, people management, analytical and coordination skills.
• Engineer shall have good interface knowledge with other disciplines especially Process, Piping, Electrical & Instrumentation etc. and knowledge of all discipline documents and drawings is required.
• Good Knowledge of International Mechanical Codes and Standards like ASME SEC.VIII DIV.1 / DIV.2, TEMA, PD5500, API:650, API:660, API:661, ASME, API etc. applicable to Rotary Equipment – API 610, API 674, API 675, API 676, API 617, API 618, API 619, API 672 etc.
• Review designs & plans, layouts, working drawings and managing resources to ensure execution of projects within time and budgeted parameters.
• Monitor closely the fast-track projects and meet the project deadline on time.
• Deftness in swiftly ramping projects in coordination with clients, consultants & contractors.
• Allocating tasks to Team Lead & Technical Expert on abroad site for technical support if required.
• Evaluating Equipment design progress & development
• Exposure in Equipment design calculation and FEA
• Proven technical experience in Static Equipment Engineering with extensive skills using essential pressure vessel design softwares such as Pv-Elite, Compress, TANK, etc
• Exposure in Layout development and Skid based designs.
• Equipment handled should cover material of construction of CS, LTCS, SS, CS+Clad, LAS, HAS, NACE MR0175, HIC etc. for applications with temperature ranging from hot service to cryogenic with special services like Hydrogen, Lethal, Wet Sour, Cyclic, Sea Water etc.
• Standardization of Design Procedures and review Check list and Design Guidelines

Essential:

EDUCATION/ EXPERINCE REQUIRED

• Bachelor’s Degree /Post graduate degree in Mechanical Engineering or equivalent degree from recognized university.
• Min 15+ years relevant experience in Mechanical Engineering from Oil and Gas industry (Upstream & Downstream).

SKILLS/ TRANING REQUIRED:

• Support the Lead Engineer / Engineering Manager in development and implementation of the Strategy outlined for the Mechanical Engineering Department.
• Good knowledge in Equipment Design (Static & Rotary)
• Review project design basis and specifications to ensure integrity in-line with project requirement.
• Evaluation of vendor offers, Raising TQs, Preparation of Technical Bid Evaluation and Post order vendor documents review.
• Participate in the supplier tender process including development of scope, input to the tender evaluation and clarification activities.
• Preparation of Deliverable list & Schedule, Man-hour estimate, Resource requirement and Progress report
• Participating in Design Review and Progress Review meetings.
• Evaluation / Review / Checking of Design Documents / Drawings
• Communication, people management, analytical and coordination skills.
• Engineer shall have good interface knowledge with other disciplines especially Process, Piping, Electrical & Instrumentation etc. and knowledge of all discipline documents and drawings is required.
• Good Knowledge of International Mechanical Codes and Standards of both static and rotating Equipment.
• Review designs & plans, layouts, working drawings and managing resources to ensure execution of projects within time and budgeted parameters.
• Monitor closely the fast-track projects and meet the project deadline on time.
• Deftness in swiftly ramping projects in coordination with clients, consultants & contractors.
• Allocating tasks to Team Lead & Technical Expert on abroad site for technical support if required.
• Evaluating Equipment design progress & development
• Exposure in Equipment design calculation and FEA
• Proven technical experience in Static Equipment Engineering with extensive skills using essential pressure vessel design software such as PV-Elite, Compress, TANK, etc.,
• Exposure in Layout development and Skid based designs.
• Standardization of Design Procedures and review Check list and Design Guidelines.